Nickel 201 Round Bar





Product Details

The properties of nickel 201 are similar to that of nickel 200. However, because the content of carbon is lower in the alloy of Nickel 201 Round Bar, it is not susceptible to embrittlement brought on by inter-granular carbon at elevated temperatures. The higher content of nickel in the alloy makes these components resistant to several chemicals including acids and alkalis, as well as to dry gases at ambient temperature. The significance of nickel in the Nickel Alloy 201 Square bar is also responsible for the material’s resistance to mineral acids. However, this is a property that is dependent on aspects such as the temperature, aeration, and concentration of the solution.

		Condition	Tensile(ksi)	.2% Yield(ksi)	Elongation(%)	Hardness(HRB)
Available Product Forms:	pipe,tube,sheet,strip,plate,round bar,flat bar,forging stock,hexagon and wire
Rod and Bar:	ASTM B 160; ASME SB 160, DIN 17752, ISO 9723, VdTÜV 345.	Hot Finished	60-85	15-45	55-35	45-80
		Cold Drawn/Annealied or Hot Finished/Annealed	55-75	15-30	55-40	45-70
Pipe and Tube:	ASTM B 161; ASME SB161, ASTM B 163; ASME SB 163, ASTM B 725; ASME SB 725, ASTM B730; ASME SB 730, ASTM B 751; ASME SB 751, ASTM B775; ASME SB 775, ASTM B 829; ASME SB 829, DIN 17751, ISO 6207, BS 3074 (NA12), VdTÜV 345.	Seamless Annealed	55-75	12-30	60-40	70max
Plate,Sheet&Strip:	ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208, BS 3072-3073 (NA12), SAE AMS 5553, VdTÜV 345.	Hot-Rolled/Annealed	55-80	15-40	60-40	45-75
Fittings:	ASTM B 366/ ASME SB 366
Forgings:	ISO 9725, DIN 17754
Wire：	DIN 17753, ISO 9724
Chemical Composition	Nickel(Plus Cobalt):99.0 min.
	Copper:0.25 max.
	Iron:0.40 max.
	Manganese:0.35 max.
	Carbon: 0.15 max.
	Silicon: 0.35 max.
	Sulfur: 0.01 max.

Recommended

{{title}}